Avast Boot Time Scan Not Working

Common Avast Boot Time Scan Not Working and their Solutions

Avast Boot Time Scan Not Working will be there as you use your computer. These problems will exist even if you’re using the computer for many years now. If you use the internet to browse frequently, issues are more inclined to happen as well. That only implies that your personal computer knows when it is not in a good state, and it is a good thing for you. If the problem is not taken care as quickly as possible, tendency is it will worsen and you don’t want that. That it’s why it’s very important to know the main cause of the error and come up with the right solution.

When you have added an incompatible application to the computer, it may cause Avast Boot Time Scan Not Working, another reason will be a non-functional driver. The fastest move to make to get the computer to its normal state is re-install the os. Nonetheless, remember that doing such move will just set everything to default but won’t actually diagnose and deal with the real issue. Fixing the issue yourself on the other hand is beneficial as you will be learning something afterwards when it comes to trouble-shooting. The following are the most typical pc errors and a few tips to get them resolved.

Blue Screen of Death

This might be a familiar Avast Boot Time Scan Not Working to you This is an os issue that can’t be resolved using certain shortcut keys considering that the change of a software or hardware on your computer caused it. If a device is the cause of the problem, you could fix the problem by disconnecting it. However, if a software you recently installed caused the problem, you can just fix it by removing the software. Just reboot the computer and open it using the safe mode when fixing the problem or uninstalling something.

Low Virtual Memory

There are programs which consume a lot of RAM space. Low virtual memory will cross your way once constant usage of such applications happens. This issue could be prevented if a bigger space of RAM is present in your personal computer. Having said that, if you have only limited RAM space, you might need to purchase additional RAM chips if you wish to continue using your computer smoothly. This problem actually has a quick alternative fix and it’s through boosting your pagefile size. You just have to go to the system settings through the control panel. Click Advanced system settings at the top left of the window. Then you can proceed to the advanced tab and settings. From then on, increasing your PageFile is achievable, even 2 times of your RAM’s memory.

Missing DLL Files

There are 2 causes of this Avast Boot Time Scan Not Working, it can be due to a missing file of a certain program or an improperly installed program. The former is commonly solvable through installing the software again. Nevertheless, if it is about a missing file, then you need to go over the web and search for a downloadable file of it. It does not always happen that all files that you’ll download works. You should also check if your anti-virus is capable of determining viruses that trigger ‘lost DLL files’ prompt message. If your anti-virus is out of date then chances are viruses can pass through it very easily. It is advised to get a good anti-virus to find and remove this type of virus.

Avast Boot Time Scan Not Working are of countless numbers and it is good to know a number of them and the ways to fix them. With the tips given above, you will definitely be able to fix any of the above issues in the future. Avoid attempting to run away from the problem, try doing it yourself. It will develop your skills and save you money.